|
>>Model
Kind of motors
Index Page |
|
|
| Single
phase induction motor/ 3 phase induction motor |
| Remarks
: | *
Rated continuous operation.
* E class insulation.
* Capacitive induction
motor shall be used for high power output and low noise single phase motor.
* Using the 220V, 3 phase AC Induction motor. | |
| Single
phase reversible motor |
| Remarks
: |
| * | Instantaneous
alternate between normal and reversible for motors equipped with balanced windings
and built-in simple mechanism. | | * | Thirty
minutes of rated operation. Difference between the induction motor and reversible
motor and reversible motor: the later one can instantaneously be reversible, however
rotating magnetic field & reversible momentum for induction motor occurs in
reversible direction. In case no reversible shall be made in loading condition. |
| | | Single
phase motor with electromagnetic brake / 3-phase motor with electromagnetic brake |
| Remarks
: |
| * | Always
maintain the load properly: For a non-exciting type electrical magnetic brake,
loading can be kept normally by the brake whenever the power source is "Off". |
| * | Instantaneous
brake: Over-travel in 2-4 cycles only for a single motor. |
| * | More
complex, controllable, instantaneous Normal / Reversible time : Allowable "Stop"
for 6 times per minute. ( 3 second or more have to be kept for each "Stop",
C&B type of motor is applicable on 100 times of "stop" per minute
if necessary. | | |
| Stepless
Variable Speed Control Motor |
| Remarks
: |
| * |
Wide range of variable speed is adjustable by using the speed controller.
（50Hz…..90~1400rpm；60Hz…..90~1700rpm). |
| * |
More operational procedure shall be available, such as: variable speed selection,
normal/reversible, slower starting, slower speed reduction, etc. |
| * |
Built-in rpm sensors, feed-back control, a constant rpm can be obtained even if
there is any frequency variation. | | |
| Variable
Speed Control Motor with Electromagnetic Brake |
| Remarks
: |
| * | Wide
range of variable speed is adjustable by using the speed controller.
（50Hz…..90~1400rpm；60Hz…..90~1700rpm） |
| * | More
operational procedure shall be available, such as: variable speed selection, normal/reversible,
slower starting, slower speed reduction, etc. | | * |
Built-in rpm sensors, feed-back control, a constant rpm can be obtained even if
there is any frequency variation. | | |
| Linear
Type Gear Head And Variable Speed Motor |
| Remarks
: |
| * | Simple
method for the automatic mechanical materials lifting operation. |
| * |
Selectable in any type of driving motor. (IK, RK, US, DM…..etc.) |
| * |
Offering all kind of operation such as; Swing left and right , Swing up and down. |
| |
| Permanent
magnetic DC motor |
| Remarks
: |
| * | Battery
can be used as a power source if AC power is not available. |
| * | Simple
control box, adjustable voltage, for speed alternating purpose. |
| * |
Wide range for variable speed, larger torque operation. | |
| |
Worm
Gear Reduction Motor
|
| |
| Specification: | Remarks
: | | Worm
Gear motor
HP：25W~200W
V：
100V~110V．200V~220V
200V~220V． 380V~440V
|
| * | To
reduce the space requirements for installation the 90 degree output power shaft
can be used. | | * | Certain
durability in stoppage. | | * |
Any kind of motor can be used. | | * | (IK、RK、US、DM….etc.) |
| | |
| Gear
Reducer Motor..... |
|
|
| Specification: | Remarks
: | |
Horizontal
Type Gear Reduction Motor
HP：100W~3700W
V：
100V~110V．200V~220V
200V~220V．380V~440V
Optional: electric magnetic
brake
|
| * | Smaller
dimension; | | * |
Light
weight; |
| * |
Lowest noise; | | * |
High quality materials; | | * | Available
of all kinds of motor; | | * | Simplified
erection; | | * | Easy
maintainance. | |
Vertical
Type Gear Reduction Motor
HP：100W~3700W
V：
100V~110V．200V~220V
200V~220V．380V~440V
Optional:
electric magnetic brake | | |
|
Reduction Device.... |
| Remarks
: |
| 1. | The
aluminum alloy frame, beautiful, firm and light-weight. B type: 550g in weight
and 99.5mm in full length. | | 2. | High-precision
type 0.1* below. Low back-space type 0.3* below. | | 3. |
Deceleration rate 1/3~1/25. Input capacity 30W~5000W. | | 4. |
The inner capacity is high-precision, minimized, low-inertia, and applicable to
the control of precision operation. | | 5. | Adopts
premium lubrication grease, all-sealed fill structure, and always oil change-free. |
| 6. | Input
flange is standardized, fit for any servomotor manufactured by any brand. The
direction of the output axis can be installed at will. | |
| Remarks
: |
| 1. | High-strength
aluminum alloy frame, artistic and light-weight so that the machine body can lose
some pounds. | | 2. | All-seal
design and oil change-free; installable in any direction. |
| 3. | The
input flange adopts IEC standards and fits for any brand of motor. |
| |
| DISCO
Stepless Gearbox |
| |
| Specification: | |
| DISCO
Stepless Gearbox with or w/o Motor
| * | HP：0.2KW∼3.7KW |
| * | Speed-change
range：
| 50Hz | 165∼1000rpm |
| 60Hz
| 200∼1200rpm |
| |
| * |
R-type deceleration
rate is provided： | | |
| AR2.5
| 50Hz
66∼400rpm | | | 60Hz
80∼480rpm |
| AR5
| 50Hz
33∼200rpm | | | 60Hz
40∼240rpm | | | |
|
TOP
| |
